Husqvarna H46 is the perfect saw chain for professionals who want a fast cutting chisel chain with the smooth performance of a low vibration bumper drive link. Razor sharp chisel cutters make quick work of both hardwoods and softwoods. H46 works best in clean cutting conditions, where there is limited contact with dirt and other abrasive materials. H46 chain sharpens with a 7/32" round file or 3/16" grinding wheel.
Genuine OEM Husqvarna Saw Chain Part # 585 55 00-72 Supersedes Part # 591 11 94-72, 591119472 and Part # 501 84 25-72, 501842572
Genuine OEM Husqvarna Saw Chain Part # 585 55 00-72 Supersedes Part # 591 11 94-72, 591119472 and Part # 501 84 25-72, 501842572
| Pitch | 3/8" (.375") |
| Gauge | .050" (1.3mm) |
| Sequence | Standard |
| Cutter Type | Chisel |
| Recommended Saw Sizes | 3.0-6.0 cubic inches (50-100cc) |
| Recommended Bar Lengths | 12"-36" (30-90cm) |
| Kickback Reduction Features | Bumper Link |
| ANSI Approved Low Kickback Chain | No |
Replacement Oregon Part Number 72LPX-72
This Item Fits The Following:
Alpina/Castor: A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
CubCadet: CS5018, CS5220, CS5720
Dolmar: 109, 110, 110 EX, 111, 112, 113, 114, 115, 116 si, 117, 118, 119, 120, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6100 (3/8" Pitch), PS-6400, PS-6400 H, PS-6400 W, PS-6800, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
Efco: 156 (.375 Pitch), 165, 181 (After Aug 07), MT 7200, MT 8200
Fairmount Hydraulic: HCS816, HCS820, HCS824
Homelite: 30
Husqvarna: 1100 CD, 133, 140, 154, 160, 162, 181, 185, 2100 CD, 2101, 234, 238, 242, 246, 254, 257, 260, 261, 262 XP, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 340, 345, 346 XP, 350, 351, 353, 357 XP, 359, 362 (8.2mm Studs), 362 (9mm Studs), 365, 371 XP, 372 XP, 38, 380, 385 XP, 390 XP, 394 XP, 395 XP, 40, 42, 435, 44, 440, 444, 445, 45, 450, 450 Rancher, 455, 455 Rancher, 460, 460 Rancher, 465, 465 Rancher, 480 CD, 49, 50, 51, 543 XP, 545, 55, 55 Rancher, 550 XP, 555, 560, 562 XP, 570, 575 XP, 576 XP, 61, 65, 66, 70, 77
Jonsered: 2050 (.375 Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2065, 2071, 2077, 2083, 2094, 2095, 2149 (.375 Pitch), 2150 (.375 Pitch), 2159 (.375 Pitch), 2163 (.375 Pitch), 2165, 2171, 2186, 625, 630, 670, CS 2147 (3/8" Pitch), CS 2150 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch), Ripping Mill
Makita: DCS 510, DCS460, DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL, EA5000P
McCulloch: 555
Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
Poulan/PoulanPRO: 425, 445, 475, 5020AV Poulan Pro, 505, PRO415
Shindawa (SDK): 550, 575, 577, 680, 695, 757
Solo: 603, 651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch), 662, 665, 667, 670, 675, 680, 681, 690, 694
Stihl: 024, 026, 028, 029, 030, 031, 032, 034, 036, 038, 039, 040, 041, 042, 044, 045, 046, 048, 056, 064, 066, E 15 Electric, E 20 Electric, E 220 Electric, MS 260, MS 261, MS 270, MS 271, MS 280, MS 290, MS 291, MS 310, MS 311, MS 340, MS 341, MS 360, MS 361, MS 362, MS 380, MS 390, MS 391, MS 440, MS 441, MS 460, MS 460 R, MS 461, MS 640, MS 650, MS 660, MS 661, MSE 220 Electric
Any cross-reference is provided as a courtesy. You will be responsible for making sure the part number we are providing will fit your application. If you are unsure, please contact us before purchasing for help. Please have your model and serial number available.
