Husqvarna H82 is fastest cutting saw chain made today. When sharpened correctly, no other chain cuts faster and smoother. This chain style is primarily used on the west coast in big softwood timber. Hand filing this chain properly is very difficult to do. Most operators will invest in a chisel grinder and bring freshly ground chains to the job. This chain works best cutting clean wood, and will dull quickly in abrasive conditions. If the sharp point on the cutter becomes dull, the chain quits cutting efficiently. H82 chain sharpens with a double bevel or 3 corner file or chisel grinder.
| Pitch | 3/8" (.375") |
| Gauge | .050" (1.3mm) |
| Sequence | Skiptooth |
| Cutter Type | Square Ground Chisel |
| Recommended Saw Sizes | 3.0-6.0 cubic inches (50-100cc) |
| Kickback Reduction Features | None |
| ANSI Approved Low Kickback Chain | No |
Replacement Oregon Part Number 72CJ-93
This Item Fits The Following:
Alpina/Castor: A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600
CubCadet: CS5018, CS5220, CS5720
Dolmar: 109, 110, 110 EX, 111, 112, 113, 114, 115, 116 si, 117, 118, 119, 120, 120 si, 120 Super, PS-460 (3/8" Pitch), PS-510 (3/8" Pitch), PS-5100, PS-5100 S (3/8" Pitch), PS-5105, 5105H (3/8" Pitch), PS-6100 (3/8" Pitch), PS-6400, PS-6400 H, PS-6400 W, PS-6800, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
Efco: 156 (.375 Pitch), 165, 181 (After Aug 07), MT 7200, MT 8200
Fairmount Hydraulic: HCS816, HCS820, HCS824
Homelite: 30
Husqvarna: 1100 CD, 133, 140, 154, 160, 162, 181, 185, 2100 CD, 2101, 234, 238, 242, 246, 254, 257, 260, 261, 262 XP, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 340, 345, 346 XP, 350, 351, 353, 357 XP, 359, 362 (8.2mm Studs), 362 (9mm Studs), 365, 371 XP, 372 XP, 38, 380, 385 XP, 390 XP, 394 XP, 395 XP, 40, 42, 435, 44, 440, 444, 445, 45, 450, 450 Rancher, 455, 455 Rancher, 460, 460 Rancher, 465, 465 Rancher, 480 CD, 49, 50, 51, 543 XP, 545, 55, 55 Rancher, 550 XP, 555, 560, 562 XP, 570, 575 XP, 576 XP, 61, 65, 66, 70, 77
Jonsered: 2050 (.375 Pitch), 2051 (.375 Pitch), 2054 (3/8" Pitch), 2055 (.375 Pitch), 2063 (.375 Pitch), 2065, 2071, 2077, 2083, 2094, 2095, 2149 (.375 Pitch), 2150 (.375 Pitch), 2159 (.375 Pitch), 2163 (.375 Pitch), 2165, 2171, 2186, 625, 630, 670, CS 2147 (3/8" Pitch), CS 2150 (.375 Pitch), CS 2152 (3/8" Pitch), CS 2153 (3/8" Pitch), CS 2156 (.375 Pitch), CS 2159 (.375 Pitch), CS 2163 (.375 Pitch), CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, CS 2250 (.375 Pitch), CS 2252 (.375 Pitch), CS 2253 (.375 Pitch), CS 2255 (.375 Pitch), CS 2258 (.375 Pitch), CS 2260 (.375 Pitch), Ripping Mill
Makita: DCS 510, DCS460, DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL, EA5000P
McCulloch: 555
Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
Poulan/PoulanPRO: 425, 445, 475, 5020AV Poulan Pro, 505, PRO415
Shindawa (SDK): 550, 575, 577, 680, 695, 757
Solo: 603, 651, 651SP (.375" Pitch), 652 (.375" Pitch), 654 (.375" Pitch), 656 (.375" Pitch), 662, 665, 667, 670, 675, 680, 681, 690, 694
Any cross-reference is provided as a courtesy. You will be responsible for making sure the part number we are providing will fit your application. If you are unsure, please contact us before purchasing for help. Please have your model and serial number available.
