Kawasaki OEM Carburetor Gasket Set 11028-6318
The Kawasaki 11028-6318 Carburetor Gasket Set is a genuine OEM Kawasaki service kit for select Kawasaki FR, FS, FT and FX V-Twin engines equipped with a single-barrel Walbro carburetor. It contains the carburetor gaskets, seals, float valve and related service components used when repairing or resealing the compatible carburetor.
Kawasaki part number 11028-6318 replaces the older 11028-6295 carburetor gasket kit. Because Kawasaki engine families can use different carburetors depending on the exact engine specification, verify your complete engine model and specification number before ordering.
Important fitment information: 11028-6318 is intended for compatible engines using the single-barrel Walbro carburetor. It should not be selected by engine family alone.
Kawasaki also uses different service kits for certain dual-barrel and TK carburetor configurations. Check the carburetor type and complete engine specification before purchasing.
Kawasaki 11028-6318 Part Details
| 11028-6318 Carburetor Gasket Set Specifications | |
|---|---|
| Manufacturer | Kawasaki |
| Part Number | 11028-6318 |
| Part Type | Carburetor Gasket / Service Kit |
| Condition | New |
| Part Quality | Genuine OEM Kawasaki Replacement Part |
| Replaces | Kawasaki 11028-6295 |
| Carburetor Type | Single-Barrel Walbro Carburetor |
| Engine Type | Select Carbureted Kawasaki V-Twin Engines |
| Primary Engine Families | FR651V, FR691V, FR730V, FS651V, FS691V, FS730V, FT651V, FT691V, FT730V, FX651V, FX691V and FX730V |
What Is Included in Kawasaki 11028-6318?
Kawasaki's carburetor kit application information identifies the following service components in the 11028-6318 single-barrel Walbro carburetor kit:
| Included Kawasaki Part | Description | Qty. |
|---|---|---|
| 11061-7009 | Carburetor Float Bowl Gasket | 1 |
| 11061-1573 | Carburetor Solenoid Gasket | 1 |
| 11061-7086 | Intake Pipe / Carburetor Gasket | 1 |
| 11061-7087 | Carburetor / Insulator Gasket | 1 |
| 11061-7088 | Insulator / Manifold Gasket | 1 |
| 92093-0593 | Carburetor Choke / Throttle Shaft Seal | 2 |
| 16030-7003 | Carburetor Float Valve | 1 |
| 92066-2244 | Welch Plug | 1 |
| 92066-2204 | Welch Plug | 1 |
What Kawasaki Engines Use 11028-6318?
The Kawasaki 11028-6318 carburetor gasket set is used on select carbureted engines in the following Kawasaki families when equipped with the applicable single-barrel Walbro carburetor:
- Kawasaki FR651V
- Kawasaki FR691V
- Kawasaki FR730V
- Kawasaki FS651V
- Kawasaki FS691V
- Kawasaki FS730V
- Kawasaki FT651V
- Kawasaki FT691V
- Kawasaki FT730V
- Kawasaki FX651V
- Kawasaki FX691V
- Kawasaki FX730V
This does not mean 11028-6318 fits every specification of every engine listed above. Kawasaki uses different carburetor configurations within the same engine family. Always match the engine model, specification number and carburetor type.
11028-6318 vs. Other Kawasaki Carburetor Kits
The carburetor style is a key part of choosing the correct Kawasaki gasket kit. For the 651V, 691V and 730V engine families, different carburetor configurations can require different kits.
| Kawasaki Part Number | Carburetor Configuration |
|---|---|
| 11028-6318 | Single-Barrel Walbro Carburetor |
| 11028-6317 | Dual-Barrel Carburetor |
| 11028-6359 | Single-Barrel TK Carburetor |
Do not order based only on "FR691V," "FR730V," or another family number. Two engines in the same family may use different carburetor configurations. Use the complete model/specification number from the engine identification label to confirm fitment.
What Is the 11028-6318 Gasket Set Used For?
The 11028-6318 is a carburetor service kit, not a complete replacement carburetor. Its gaskets, seals, float valve and plugs are used when servicing the compatible Walbro carburetor and replacing components that are normally disturbed or inspected during carburetor disassembly.
Carburetor service may be appropriate when the carburetor has deteriorated seals, a leaking float valve or other internal service needs. Engine symptoms such as hard starting, surging, fuel leakage or poor running can have several causes, so diagnose the fuel and ignition systems before assuming a gasket kit alone will correct the problem.
Why Match the Kawasaki Engine Specification Number?
Kawasaki engine model numbers such as FR691V identify an engine family, but the complete specification identifies the exact configuration used by the equipment manufacturer. That configuration can affect the carburetor and required service parts.
Before ordering Kawasaki 11028-6318, locate the engine identification label and record the complete model and specification. If you are unsure which carburetor gasket kit your engine requires, contact Carroll Stream Motor Company at 1-888-208-2088 before purchasing.
Kawasaki 11028-6318 FAQs
What is Kawasaki part number 11028-6318?
Kawasaki 11028-6318 is a genuine OEM carburetor gasket and service kit for select Kawasaki engines equipped with a compatible single-barrel Walbro carburetor.
Does Kawasaki 11028-6318 replace 11028-6295?
Yes. Kawasaki 11028-6318 is the current replacement carburetor gasket kit used in place of the older 11028-6295 kit.
Is Kawasaki 11028-6318 a complete carburetor?
No. It is a carburetor gasket and service kit. It includes gaskets, seals, a float valve and related carburetor service components, but it is not a complete replacement carburetor assembly.
Does 11028-6318 fit the Kawasaki FR691V?
It fits many FR691V engine specifications that use the applicable single-barrel Walbro carburetor, but it does not fit every FR691V. Verify the complete engine specification before ordering.
Does 11028-6318 fit the Kawasaki FR730V?
It is used on many FR730V configurations with the compatible single-barrel Walbro carburetor. Because other carburetor configurations were also used, confirm the engine specification and carburetor type first.
Does 11028-6318 fit Kawasaki FS651V, FS691V and FS730V engines?
Yes, the kit is used on select FS651V, FS691V and FS730V specifications equipped with the compatible single-barrel Walbro carburetor. Exact fitment depends on engine specification.
Does 11028-6318 fit Kawasaki FX engines?
The kit is applicable to select carbureted FX651V, FX691V and FX730V specifications using the compatible single-barrel Walbro carburetor. Some FX engines use a different carburetor and require a different kit.
What type of carburetor is Kawasaki 11028-6318 for?
Kawasaki 11028-6318 is designed for the applicable single-barrel Walbro carburetor.
What is the difference between Kawasaki 11028-6318 and 11028-6317?
Kawasaki 11028-6318 is for the applicable single-barrel Walbro carburetor. Kawasaki 11028-6317 is the carburetor kit used for applicable dual-barrel configurations.
How do I know if 11028-6318 fits my Kawasaki engine?
Locate the engine model and specification number on the engine identification label and verify the carburetor configuration. Do not rely on the engine family number alone.
Is 11028-6318 a genuine Kawasaki part?
Yes. Carroll Stream sells 11028-6318 as a genuine OEM Kawasaki replacement part.
