SEAL-OIL,38X62X8MTCLV 92049-7028

Kawasaki OEM Oil Seal 92049-7028 – 38 x 62 x 8mm

The Kawasaki 92049-7028 Oil Seal is a genuine OEM shaft seal used in the cylinder and crankcase assemblies of select Kawasaki FR, FS, FT and FX 4-cycle engines.

Kawasaki identifies this part as SEAL-OIL,38X62X8MTCLV. Its nominal dimensions are 38 mm inside diameter, 62 mm outside diameter and 8 mm width.

Kawasaki 92049-7028 Product Details

What Does Kawasaki 92049-7028 Do?

92049-7028 provides an oil-tight seal where the rotating shaft passes through the applicable crankcase opening.

The seal helps retain engine oil inside the crankcase while allowing the shaft to rotate through the sealing lip.

A worn, hardened or damaged shaft seal can allow oil to leak around the crankcase opening.

92049-7028 Dimensions

Kawasaki's part description identifies this seal by its 38 x 62 x 8 dimensions:

• 38 mm – Inside diameter
• 62 mm – Outside diameter
• 8 mm – Seal width / thickness

What Engines Use Kawasaki 92049-7028?

Kawasaki parts catalogs document 92049-7028 across hundreds of 4-cycle engine specifications.

Common documented engine families include select:

• Kawasaki FR541V
• Kawasaki FR600V
• Kawasaki FR651V
• Kawasaki FR691V
• Kawasaki FR730V
• Kawasaki FS481V
• Kawasaki FS541V
• Kawasaki FS600V
• Kawasaki FS651V
• Kawasaki FS691V
• Kawasaki FS730V
• Kawasaki FT651V
• Kawasaki FT691V
• Kawasaki FT730V
• Kawasaki FX481V
• Kawasaki FX541V
• Kawasaki FX600V
• Kawasaki FX651V
• Kawasaki FX691V
• Kawasaki FX730V

This is an engine-family reference rather than a universal fitment list. Verify the complete Kawasaki specification before ordering.

Documented Application Examples

Exact Kawasaki cylinder/crankcase diagrams document 92049-7028 on applications including:

• FR541V-AS00
• FR600V-AS04
• FR651V-BS43
• FR651V-GS50
• FR691V-AS39
• FR730V-GS05
• FS481V-AS00
• FS541V-AS31
• FS730V-CS25
• FS730V-DS17
• FT651V-AS00
• FT691V-AS08
• FT730V-AR30
• FT730V-BS08
• FX651V-AS13
• FX691V-BS50
• FX730V-CS17
• FX730V-ES12

These are representative documented applications, not a complete compatibility list.

Do Not Confuse 92049-7028 With Other Kawasaki Oil Seals

Kawasaki cylinder/crankcase diagrams can contain several different oil seals at the same time.

For example, applicable engine diagrams may list:

• 92049-7028 – SEAL-OIL, 38 x 62 x 8
• 92049-7010 – SEAL-OIL, 35 x 48 x 8
• 92049-7019 – SEAL-OIL, 8 x 14 x 5
• 92049-7001 – Smaller engine oil seal used at another location

These seals have different dimensions and functions within the engine and should not be treated as interchangeable.

How Many 92049-7028 Seals Does the Engine Use?

Kawasaki cylinder/crankcase diagrams commonly show quantity 1 for 92049-7028.

For example, the FR651V-S36 cylinder/crankcase catalog lists one 92049-7028 along with separate oil seals 92049-7010, 92049-7019 and 92049-7001.

Is Kawasaki 92049-7028 Still Current?

Yes. Current Kawasaki dealer catalogs continue to list 92049-7028 as a genuine Kawasaki service part.

No verified superseding Kawasaki OEM part number was found for 92049-7028.

When Should an Engine Oil Seal Be Replaced?

An oil seal should be inspected when leakage is visible around its sealing location or when engine disassembly exposes the seal.

Sealing lips can wear, harden or become damaged over time. The shaft sealing surface and surrounding crankcase area should also be inspected when replacing the seal.

Before Ordering Kawasaki 92049-7028

• Locate the complete Kawasaki engine model and specification.
• Verify 92049-7028 in the exact cylinder/crankcase diagram.
• Confirm that the required seal is the 38 x 62 x 8 version.
• Do not substitute another Kawasaki oil seal based only on appearance.
• Inspect the shaft sealing surface when replacing a leaking seal.
• Follow the applicable Kawasaki service procedure during installation.

Need help confirming the correct Kawasaki oil seal? Contact Carroll Stream Motor Company at 1-888-208-2088 with the complete Kawasaki engine model and specification number.