Rehlko OEM Exhaust Stud M6 x 1.0 x 36mm 24 072 08-S
The Rehlko 24 072 08-S Stud, formerly sold under the Kohler Engines brand, is a genuine OEM threaded stud used in the exhaust and muffler mounting system on select Rehlko/Kohler engines.
The manufacturer identifies part number 24 072 08-S as STUD, M6X1.0X36. It has an M6 x 1.0 metric thread and an overall specified length of 36 mm.
Manufacturer: Rehlko / Formerly Kohler Engines
Part Number: 24 072 08-S
OEM Description: STUD, M6X1.0X36
Part Type: Exhaust / Muffler Mounting Stud
Thread Size: M6 x 1.0
Length: 36 mm
Verify the complete engine model and specification before ordering.
Rehlko/Kohler uses multiple exhaust-stud sizes and part numbers. Do not substitute another stud solely because the thread diameter appears similar.
24 072 08-S Product Details
| 24 072 08-S Exhaust Stud Information | |
|---|---|
| Brand | Rehlko / Kohler Engines |
| Part Number | 24 072 08-S |
| Common Search Format | 24-072-08-S / 2407208-S |
| OEM Description | STUD, M6X1.0X36 |
| Part Type | Threaded Exhaust / Muffler Mounting Stud |
| Thread | M6 x 1.0 |
| Specified Length | 36 mm |
| Condition | New |
| Quality | Genuine OEM Rehlko / Kohler |
| Engine System | Exhaust / Muffler Mounting |
What Is Rehlko 24 072 08-S Used For?
Part number 24 072 08-S is used as a threaded mounting stud in the exhaust system on compatible Rehlko and Kohler engines.
Rehlko's own engine-accessory documentation specifies two 24 072 08-S studs when mounting several compatible canister mufflers.
The stud works with the exhaust mounting hardware to secure the applicable muffler or exhaust assembly to the engine.
What Engines Use 24 072 08-S?
Rehlko/Kohler parts diagrams document 24 072 08-S across a wide range of vertical-shaft and EFI engine configurations.
Documented engine families include select:
- Command PRO CV17 through CV25 engines
- Command PRO CV620 through CV750 engines
- Command PRO CV730 and CV740 engines
- Command PRO CV742 engines
- Command PRO EFI CV26 / CV745 applications
- Command PRO EFI ECV630 through ECV749 engines
- Aegis LV625 through LV680 engines
- Select PCV680 through PCV740 engines
These are documented engine-family examples rather than a guarantee that every specification within each family uses this exact stud.
Documented Engine Examples
Illustrated exhaust diagrams specifically show 24 072 08-S on engine specifications including:
- CV20-65528
- CV23-75513
- CV26-79511
- CV26-79514
- CV730-0036
- CV740-0004
- CV740-0015
- CV740-3029
- CV740-3127
- CV742-3018
- ECV740-3071
- ECV749-3002
- ECV749-3018
- LV680-0001
Always verify the complete model/specification before ordering, since the exhaust hardware can vary between engine configurations.
24 072 08-S and Rehlko Canister Mufflers
Rehlko's official engine accessory guide specifies 24 072 08-S as part of the mounting hardware for several commercial and quiet canister mufflers.
The published mounting instructions call for:
- 2 x 24 041 49-S exhaust gaskets
- 2 x 24 072 08-S studs
- 2 x M-641060-S M6 flange nuts
- 4 x 25 100 52-S nuts
These related components are separate parts unless a muffler kit specifically states that mounting hardware is included.
Is 24 072 08-S the Same as 25 072 24-S?
No. Current Rehlko/Kohler exhaust diagrams can list both 24 072 08-S and 25 072 24-S as separate stud part numbers within the same exhaust assembly.
They should therefore not be treated as interchangeable solely because both are exhaust-system studs.
If the engine diagram specifies 24 072 08-S, order that exact M6 x 1.0 x 36 mm stud unless current Rehlko service information explicitly directs otherwise.
Older Part Number References
Some older equipment catalogs may reference 24-072-08 or KH-24-072-08.
OEM-parts substitution data identifies those older references with current service part 24-072-08-S.
Before Ordering Rehlko 24 072 08-S
- Locate the complete engine model and specification number.
- Open the exhaust-system parts diagram for that exact engine.
- Confirm that the diagram specifies 24 072 08-S.
- Verify the required quantity for the exhaust configuration.
- Do not substitute 25 072 24-S unless the applicable diagram calls for it.
- Check the condition of the exhaust gasket and mounting nuts during service.
Need help confirming the correct Rehlko/Kohler exhaust hardware? Contact Carroll Stream Motor Company at 1-888-208-2088 with the complete engine model and specification number.
Rehlko 24 072 08-S FAQs
What is Rehlko part number 24 072 08-S?
Rehlko 24 072 08-S is a genuine OEM M6 x 1.0 x 36 mm threaded stud used in the exhaust and muffler mounting system on select Rehlko/Kohler engines.
What size is 24 072 08-S?
The OEM description specifies M6 x 1.0 x 36 mm.
Is 24 072 08-S an exhaust stud?
Yes. Rehlko/Kohler parts diagrams list it in the Exhaust section, and Rehlko's accessory guide specifies it as mounting hardware for compatible mufflers.
How many 24 072 08-S studs are used?
Quantity depends on the engine and exhaust configuration. Rehlko's canister-muffler mounting instructions specify two 24 072 08-S studs for several compatible systems.
Is 24 072 08-S the same as 25 072 24-S?
No. Rehlko/Kohler diagrams can list both numbers as separate exhaust studs within the same assembly. Use the part number specified for the exact engine and mounting location.
Does 24 072 08-S fit CV730 engines?
Yes. It is documented on select CV730 specifications, including CV730-0036 and other Command PRO applications.
Does 24 072 08-S fit CV740 engines?
Yes. Rehlko/Kohler diagrams document 24 072 08-S on numerous select CV740 configurations.
Does 24 072 08-S fit ECV engines?
Yes. It is documented on select Command PRO EFI engines, including ECV740 and ECV749 configurations.
How do I confirm 24 072 08-S fits my engine?
Verify the complete Rehlko/Kohler engine model and specification and confirm 24 072 08-S in the exact exhaust-system parts diagram.
