GASKET, Intake 694875

Briggs & Stratton OEM Intake Gasket 694875

The Briggs & Stratton 694875 Intake Gasket is a genuine OEM engine gasket used on select Briggs & Stratton small-engine applications.

Briggs & Stratton identifies part number 694875 as GASKET, Intake. It is used as part of the engine's carburetor and intake-manifold sealing system on compatible engine Model, Type and Code combinations.

Briggs & Stratton 694875 Product Details

What Is Briggs & Stratton 694875?

Briggs & Stratton 694875 is an OEM intake gasket used to provide a sealing surface within the carburetor and intake system on compatible engines.

Briggs illustrated parts lists commonly identify 694875 as Ref. 51A – GASKET, Intake.

A properly sealed intake system helps prevent unwanted air leakage that could interfere with the engine's intended fuel-and-air mixture.

694875 vs. Briggs & Stratton 694874

694875 and 694874 are different intake gaskets.

Many Briggs & Stratton engine diagrams list both parts together:

• 694874 – GASKET, Intake – commonly Ref. 51
• 694875 – GASKET, Intake – commonly Ref. 51A

For example, the Briggs & Stratton 204412-0147-E1 carburetor diagram lists both 694874 and 694875 as separate intake-gasket components.

What Engines Use Briggs & Stratton 694875?

Briggs parts manuals document 694875 on numerous engine configurations, particularly several horizontal-shaft and snow-equipment engine families.

Documented examples include:

• 20A114-series engines
• 20B414-series engines
• 20M114-series engines
• 20M314-series engines
• 201312-series engines
• 204412-series engines
• 205412-series engines
• 210214-series engines
• 21M314-series engines
• Select older 111902 engine specifications

These are documented examples and not a universal fitment list. Briggs & Stratton fitment should always be confirmed using the full Model, Type and Code from the engine.

Documented 694875 Applications

Exact engine specifications documented with 694875 include:

• 204412-0147-E1
• 204412-0162-B1
• 204412-0163-E1
• 204412-0417-E1
• 205412-0121-E1
• 205412-0177-E1
• 20A114-0363-E1
• 20M314-0111-E1
• 20M314-0927-E1
• 21M314-0017-E1

Briggs also uses the gasket in additional specifications not listed here.

Snow Blower Engine Applications

Briggs 694875 appears in numerous engines installed on snow blowers and other outdoor power equipment.

For example, Briggs parts information for 20M314-0927-E1 lists 694875 as an intake gasket, while replacement-parts catalogs also associate 694875 with select Simplicity snow blower applications.

Equipment brand alone is not enough to establish fitment. Always use the Briggs engine identification numbers.

Is Briggs & Stratton 694875 Still Available?

Yes. Briggs & Stratton currently lists 694875 in its official replacement-parts catalog as a genuine intake gasket.

No verified Briggs & Stratton superseding part number was found for 694875.

When Should an Intake Gasket Be Replaced?

Inspect the intake gasket whenever the applicable carburetor or intake assembly is removed.

Replacement may be appropriate if the gasket is torn, cracked, compressed, deteriorated or otherwise unable to provide the intended sealing surface.

If an intake leak is suspected, inspect all related gaskets, mating surfaces and intake components rather than assuming 694875 is the only possible source.

Before Ordering Briggs & Stratton 694875

• Locate the Briggs & Stratton Model, Type and Code.
• Open the carburetor or cylinder-head parts diagram for that exact engine.
• Confirm part number 694875, commonly shown as Ref. 51A.
• Do not confuse 694875 with nearby intake gasket 694874.
• Inspect related intake sealing surfaces during service.
• Do not order solely by gasket shape.

Need help confirming the correct Briggs & Stratton gasket? Contact Carroll Stream Motor Company at 1-888-208-2088 with the complete engine Model, Type and Code.