Briggs & Stratton OEM Intake Manifold Gasket 694874
The Briggs & Stratton 694874 Intake Gasket is a genuine OEM engine gasket used on select Briggs & Stratton horizontal-shaft engines.
Briggs & Stratton identifies part number 694874 as GASKET, Intake. In many illustrated parts diagrams it is shown as Ref. 51 in the carburetor and intake assembly.
Manufacturer: Briggs & Stratton
Part Number: 694874
OEM Description: GASKET, Intake
Part Type: Intake / Intake Manifold Gasket
Common Diagram Reference: Ref. 51
Quantity: 1 Gasket
Verify the complete Briggs & Stratton Model, Type and Code before ordering.
Many Briggs engines use both 694874 and 694875 in the same intake assembly. These are different parts and should not be substituted for one another based only on appearance.
Briggs & Stratton 694874 Product Details
| 694874 Intake Gasket Information | |
|---|---|
| Brand | Briggs & Stratton |
| Part Number | 694874 |
| OEM Description | GASKET, Intake |
| Part Type | Intake / Intake Manifold Gasket |
| Engine System | Carburetor / Intake |
| Common Diagram Reference | 51 |
| Condition | New |
| Quality | Genuine OEM Briggs & Stratton |
| Quantity Sold | 1 Gasket |
What Is Briggs & Stratton 694874?
Briggs & Stratton 694874 is an OEM sealing gasket used within the engine's carburetor and intake system.
Illustrated Briggs parts diagrams commonly identify it as Ref. 51 – GASKET, Intake.
It provides the required sealing surface at its designated intake connection on compatible engines.
694874 vs. Briggs & Stratton 694875
694874 and 694875 are separate intake gaskets.
Briggs parts diagrams frequently list both:
- 694874 – GASKET, Intake – commonly Ref. 51
- 694875 – GASKET, Intake – commonly Ref. 51A
For example, Briggs 203400-series engine diagrams show both 694874 and 694875 as separate parts in the same carburetor/intake system.
Do not substitute 694875 for 694874.
If the illustrated parts list specifies Ref. 51 / 694874, use that exact gasket. If it specifies Ref. 51A / 694875, use 694875.
What Engines Use Briggs & Stratton 694874?
Briggs parts catalogs document 694874 across hundreds of horizontal-shaft engine configurations.
Documented engine families include select:
- 19H232
- 19H236
- 19H237
- 19H252
- 201312
- 201317
- 201332
- 201337
- 201352
- 201412
- 201415
- 201416
- 201417
- 201432
- 202400-series applications
- 203400-series applications
These engine-family numbers are examples rather than a universal fitment list. Always verify the complete Briggs Model, Type and Code.
Documented 694874 Engine Specifications
Exact engine specifications documented with 694874 include:
- 19H232-0001-H1
- 19H232-0110-B1
- 19H232-0114-H1
- 19H232-0122-H1
- 19H237-0117-H1
- 19H237-0125-H1
- 201312-0110-B1
- 201312-0110-E9
- 201312-0115-B1
- 201312-0139-E9
- 201317-0130-B1
- 201317-0147-E9
- 201332-0035-B1
- 202412-0100-E1
- 202412-0158-E1
- 202436-0135-E1
- 202437-0180-E1
- 203452-0049-E2
Briggs produced many additional Type and Code combinations, so the engine identification plate remains the best fitment reference.
Where Does 694874 Install?
694874 appears in Briggs carburetor and cylinder-head/intake diagrams as part of the intake sealing system.
On engines that also use 694875, each gasket occupies a separate location within the intake assembly.
Because both parts can look similar and carry the same generic OEM description, use the diagram reference and MPN to identify the correct gasket.
Is Briggs & Stratton 694874 Still Available?
Yes. Briggs & Stratton currently sells 694874 through its official parts store as an active intake gasket.
No verified Briggs & Stratton superseding OEM part number was found for 694874.
When Should an Intake Gasket Be Replaced?
Inspect the intake gasket whenever the applicable carburetor or intake component is removed.
Replacement may be appropriate if the original gasket is torn, cracked, hardened, compressed or otherwise unable to provide the intended sealing surface.
If an intake leak is suspected, inspect all related gaskets, mating surfaces and intake components before assuming that 694874 is the only source.
Before Ordering Briggs & Stratton 694874
- Locate the complete Briggs & Stratton Model, Type and Code.
- Open the exact carburetor or intake-system parts diagram.
- Confirm part number 694874, commonly shown as Ref. 51.
- Do not confuse 694874 with 694875 / Ref. 51A.
- Do not select the gasket solely by its shape.
- Inspect related intake seals whenever the assembly is removed.
Need help confirming the correct Briggs & Stratton intake gasket? Contact Carroll Stream Motor Company at 1-888-208-2088 with the complete engine Model, Type and Code.
Briggs & Stratton 694874 FAQs
What is Briggs & Stratton part number 694874?
Briggs & Stratton 694874 is a genuine OEM intake gasket used on select horizontal-shaft small engines.
What diagram number is Briggs 694874?
It is commonly identified as Ref. 51 in Briggs illustrated parts lists.
Is 694874 the same as 694875?
No. Briggs diagrams often list both parts together. 694874 is commonly Ref. 51, while 694875 is Ref. 51A.
Does 694874 fit Briggs 19H232 engines?
Yes. Briggs parts catalogs document 694874 on numerous 19H232 specifications.
Does 694874 fit Briggs 201312 engines?
Yes. It is documented on numerous 201312 Model and Type combinations.
Does 694874 fit Briggs 203400-series engines?
Yes. Briggs parts diagrams document 694874 on select 203400-series engines, commonly alongside 694875.
Has Briggs & Stratton 694874 been superseded?
No verified Briggs & Stratton superseding OEM part number was found. 694874 remains available as a current genuine service part.
How do I confirm 694874 fits my engine?
Locate the complete Briggs & Stratton Model, Type and Code and verify part number 694874 in the exact engine parts diagram.
