Kawasaki OEM Engine Gasket Set 11028-6322
The Kawasaki 11028-6322 Engine Gasket Set is a genuine OEM engine-sealing kit originally supplied for select Kawasaki FR, FS, FT and FX V-Twin engines.
Kawasaki identifies part number 11028-6322 as GASKET-SET(ENGINE). This legacy kit has now been superseded by current Kawasaki engine gasket kit 11028-6357.
Manufacturer: Kawasaki Engines
Legacy Part Number: 11028-6322
OEM Description: GASKET-SET(ENGINE)
Part Type: Engine Gasket & Seal Kit
Current Replacement: 11028-6357
Application: Select Carbureted Kawasaki V-Twin Engines
11028-6322 is a superseded Kawasaki part number.
Kawasaki's current service kit is 11028-6357. If this product listing ships 11028-6357 instead of physically stocked 11028-6322, that substitution should be stated clearly to the customer.
11028-6322 Has Been Replaced by 11028-6357
Current Kawasaki service information directs applications formerly using 11028-6322 to 11028-6357.
Legacy Engine Gasket Kit: 11028-6322
Current Engine Gasket Kit: 11028-6357
This supersession is especially important when servicing an older engine because the original illustrated parts list may still identify 11028-6322.
Compatible Kawasaki Engine Families
Kawasaki's current replacement-kit guide identifies 11028-6357, the replacement for 11028-6322, for select carbureted specifications in these engine families:
- FR651V, FR691V and FR730V
- FS651V, FS691V and FS730V
- FT651V, FT691V and FT730V
- FX651V, FX691V and FX730V
These are engine families rather than universal fitment. Verify the complete Kawasaki model and specification number before ordering.
Current 11028-6357 Replacement Kit Contents
Kawasaki's current gasket-kit guide identifies the following components in replacement engine kit 11028-6357:
| Part Number | Description | Qty. |
|---|---|---|
| 11004-0762 | Cylinder Head Gasket | 2 |
| 11060-7016 | Muffler Gasket | 2 |
| 11061-1285 | Rocker Case Gasket | 2 |
| 11061-7093 | Manifold / Cylinder Head Gasket | 2 |
| 11061-7094 | Breather Gasket | 1 |
| 670B2011 | Crankcase O-Ring | 2 |
| 92055-0892 | Filler Tube / Oil Drain O-Ring | 2 |
| 92049-0862 | Valve Stem Oil Seal – Intake & Exhaust | 4 |
| 92049-7010 | Crankshaft Oil Seal – Flywheel Side | 1 |
| 92049-7019 | Governor Shaft Oil Seal | 1 |
| 92049-7028 | Crankshaft Oil Seal – PTO Side | 1 |
| 92055-7025 | Air Filter Cover O-Ring | 2 |
The table above describes current replacement kit 11028-6357.
Do not guarantee that every individual component number in a sealed legacy 11028-6322 package is identical without physically verifying that older package.
Carburetor Gaskets Are Not Included
Kawasaki specifically identifies the current 11028-6357 replacement as an engine gasket kit and states that the carburetor kit is not included.
Depending on the carburetor installed on the exact engine, a separate Kawasaki carburetor gasket kit may be required.
Applicable 651V, 691V and 730V engine families can use different carburetor designs, including single-barrel Walbro, dual-barrel and TK configurations.
Engine Gasket Kit vs. Carburetor Gasket Kit
An engine gasket set is intended for sealing components used during internal engine service, including cylinder-head, rocker-case, manifold, exhaust and crankcase-related sealing points.
A carburetor gasket kit services the carburetor itself and contains different gaskets, seals and fuel-system components.
Do not assume 11028-6322 or replacement 11028-6357 includes the carburetor rebuilding components required for your particular engine.
Documented Application Examples
Kawasaki parts catalogs show legacy 11028-6322 on exact configurations including FR651V-BS27, FR691V-AS41, FS651V-HS05, FS691V-AS02, FT730V-AS04, FT730V-AS09, FX651V-CS08, FX691V-AR00 and FX730V-ES26.
In current catalogs those applications direct the engine gasket set to replacement part 11028-6357.
Why the Complete Engine Specification Matters
Kawasaki produced multiple specifications within each FR, FS, FT and FX family.
Engine gasket and carburetor-kit requirements can vary between specifications, so a general designation such as FR691V or FX730V should not be used as the only fitment check.
Before Ordering Kawasaki 11028-6322
- Locate the complete Kawasaki engine model and specification.
- Confirm 11028-6322 or replacement 11028-6357 in the exact parts diagram.
- Verify that the engine is a compatible carbureted configuration.
- Determine whether the product being shipped is legacy 11028-6322 or current 11028-6357.
- Order the carburetor gasket kit separately if carburetor service is also required.
- Verify any additional liquid gasket, hardware or internal components required for the repair.
Kawasaki 11028-6322 FAQs
What is Kawasaki 11028-6322?
Kawasaki 11028-6322 is a genuine OEM engine gasket set originally used on select FR, FS, FT and FX V-Twin engines.
What replaced Kawasaki 11028-6322?
Kawasaki 11028-6357 is the current engine gasket kit replacing 11028-6322.
Does 11028-6322 fit FR691V?
It is documented on numerous select FR691V specifications. Verify the complete engine specification before ordering.
Does 11028-6322 fit FS730V?
It is used on select FS730V specifications. Current service information directs these applications to 11028-6357.
Does 11028-6322 fit FT730V?
Yes, on select FT730V configurations. PartsTree documents it on examples including FT730V-AS04 and FT730V-AS09.
Does 11028-6322 fit FX730V?
Yes, on select FX730V specifications. Current replacement kit 11028-6357 should also be checked.
Does this kit include carburetor gaskets?
Kawasaki's current replacement kit 11028-6357 specifically does not include the carburetor gasket kit. Carburetor service parts are selected separately according to carburetor configuration.
Is 11028-6322 still current?
No. Kawasaki identifies 11028-6322 as superseded by current engine gasket kit 11028-6357.
